Hl 340 Usb To Serial Driver Ubuntu

by
340

USB serial adapter detected but not working. $ lsusb Bus 001 Device 125: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter $ ls /dev/ttyU* /dev/ttyUSB0 From syslog Dec 18 09:35:23 pieter-ThinkPad kernel: [437] usb 1-1: new full-speed USB device number 126 using xhci_hcd Dec 18 09:35:23 pieter-ThinkPad kernel: [454] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523 Dec 18 09:35:23 pieter-ThinkPad kernel: [459] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 Dec 18 09:35:23 pieter-ThinkPad kernel: [462] usb 1-1: Product: USB2.0-Ser! OS: Linux 4.4.0-31-generic #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux fresh install. Modinfo i2c-ch341 filename: /lib/modules/ 4.4.0-31- generic/ kernel/ drivers/ i2c/i2c- ch341.ko license: GPL description: i2c-ch341-u2c driver author: Marco Gittler srcversion: 793AECF7CF0745E 30FD20F9 alias: usb:v1A86p5512d *dc*dsc* dp*ic*isc* ip*in* depends: vermagic: 4.4.0-31-generic SMP mod_unload modversions parm: frequency:I2C clock frequency in hertz (uint) I try to run Arduino Nano with ch341, but nothing work. Something between USB2.0 or USB3.0? Or kernel compilation anyways?

Globetrotter hsdpa modem driver vista 32 bit windows 10. Does someone have a clue? Greetings Daniel P.S.

Jun 25, 2015 - Bug 1235715 - USB serial DB9 adapter with ch340 chip is recognized but not working. 015: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter. Kernel 4.8.0-0.rc7.git0.1.fc25.x86_64 USB-Serial Adapter driver:.

And if so, why on old kernel 3.18 work it snoothly? Also dont work a guide. Dmesg [ 1431.007315] usbcore: registered new interface driver usbserial [ 1431.007323] usbcore: registered new interface driver usbserial_generic [ 1431.007330] usbserial: USB Serial support registered for generic [ 1431.008619] usbcore: registered new interface driver ch341 [ 1431.008629] usbserial: USB Serial support registered for ch341-uart - its very nice that Serial support is registered, but not attached for example: to the BUS 003 Device 001: ID 1A86. (and this is important) ls /dev/tty* /dev/tty /dev/ttyS22 /dev/tty0 /dev/tty24 /dev/tty4 /dev/tty55 /dev/ttyprintk /dev/ttyS23 /dev/tty1 /dev/tty25 /dev/tty40 /dev/tty56 /dev/ttyS0 /dev/ttyS24 /dev/tty10 /dev/tty26 /dev/tty41 /dev/tty57 /dev/ttyS1 /dev/ttyS25 /dev/tty11 /dev/tty27 /dev/tty42 /dev/tty58.and so on. But nothing with ttyUSB0, ttyUSB1, or ttyACM0, ttyACM1. Please Is here some competent person to FIX this ISUE? 26 Jan 2017; same problem from syslog Jan 26 08:36:17 USSMLTRDLinux02 kernel: [205] usb 2-1.1: new full-speed USB device number 38 using ehci-pci Jan 26 08:36:17 USSMLTRDLinux02 kernel: [291] usb 2-1.1: New USB device found, idVendor=1a86, idProduct=7523 Jan 26 08:36:17 USSMLTRDLinux02 kernel: [297] usb 2-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 Jan 26 08:36:17 USSMLTRDLinux02 kernel: [299] usb 2-1.1: Product: USB2.0-Ser!

I found a new ch341.c source code. Pinnacle studio 18 ultimate download. And I wanted to build a module ch341.ko on ubuntu16.

04(Japanese) that kenerl- 4.4.0-81- generic, but could not build. I think that ch341.c was changed interface to upper module. Ch341.c in github is about 640 lines. So I search kernel in The Linux Kernel Archives that ch341.c has same size. Then I found kernel-4.11.6(but now 4.11.7).

I build kernel-4.11.6 on ubuntu16.04, I build kernel-image, but could not build kernel-headers. I install kernel-image to use dpkg command. And I use minicom to communicate HL-340, and work fine. Also I build kernel-4.11.6 on slackware64-14.2, HL-340 also work fine.